Heating for your home
> Consumer
> DEVI Solutions
> Products
> Support and Service
> Documentation
> Boiler Condensate Pipe Heating
 
 
 
 
SiteLogo
Floor Heating on top of your old floor

An easy and clean solution

Imagine being able to get a warm floor without going through the expenses, dirt and fuss of having to break up the old floor.
The DEVImat™ is only between 3mm and 4mm thick, depending on type.

It can therefore easily be fitted directly on to your existing floor whether it is concrete, timber or even an old tiled or terrazzo surface without needing to cut up the existing floor construction.

The DEVImat™ is installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level. Consequently, there should be no need to reduce door heights, raise skirting boards etc. 

DEVI recommends you check the insulation already in place is sufficient to ensure optimum performance, reducing downward heatloss and increasing heat up time.